.

Highly Accurate Support Resistance - Amibroker AFL Code

Click Image To Enlarge. Please Rate And Comment.

Highly Accurate Support Resistance

_SECTION_BEGIN("Patterns Wave");     
Change = Param("Wave Period",6,0,100,0.1); 
WaveLineColor = ParamColor("Wave Color", colorWhite );
procedure PlotShapeAt( x, y, shape, shift )
{
  PlotShapes( IIf( BarIndex() == x, shape, 0 ), WaveLineColor, 0, y, shift );
}
WavePattern=ParamToggle("Wave","No|Yes",0);
if(WavePattern)
{
bi = BarIndex(); 
sbi = SelectedValue( bi );
GraphXSpace = 2;
Plot( Zig( C, Change ), "", WaveLineColor, ParamStyle("Wave Style", styleThick|styleNoLabel|styleNoTitle) );
upshift = 15;
if( SelectedValue( PeakBars( C, Change ) < TroughBars( C, Change ) ) )
{
   pt1 = PeakBars( C, Change, 1 ) == 0 ;
   pt2 = TroughBars( C, Change, 1 ) == 0 ;
}
else
{
   pt1 = TroughBars( C, Change, 1 ) == 0 ;
   pt2 = PeakBars( C, Change, 1 ) == 0 ;
   upshift = -upshift;
}
bpt1 = SelectedValue( ValueWhen( pt1, bi ) );
bpt2 = SelectedValue( ValueWhen( pt2, bi ) );
bpt3 = SelectedValue( ValueWhen( pt1, bi, 2 ) );
bpt4 = SelectedValue( ValueWhen( pt2, bi, 2 ) );
bpt5 = SelectedValue( ValueWhen( pt1, bi, 3 ) );
bpt6 = SelectedValue( ValueWhen( pt2, bi, 3 ) );
PlotShapeAt( bpt1, C, shapeDigit5, upshift );
PlotShapeAt( bpt2, C, shapeDigit4, -upshift  );
PlotShapeAt( bpt3, C, shapeDigit3, upshift );
PlotShapeAt( bpt4, C, shapeDigit2, -upshift );
PlotShapeAt( bpt5, C, shapeDigit1, upshift );
}
_SECTION_END(); 

_SECTION_BEGIN("MACD Fill"); 
// Parameters
PeriodEMA = 13;
MACDIndicatorRange = 50;
// Volume filter
VolumeFilter = Param( "Volume MA filter", 100000, 50000, 500000, 100000 );
Timeframe = Interval(2);
// Adjust for weekly if necessary
if( Timeframe == "5-day" || Timeframe == "Weekly" ) {
  VolumeFilter  = VolumeFilter * 5;
}
else if( Timeframe == "Monthly") {
  VolumeFilter = VolumeFilter * 20;
}
else if( Timeframe != "Daily" ) {
  VolumeFilter = 0;
}
// Minimum number of bars required to form a divergence pattern. For a
// positive divergence, this is the number of falling bars in the context
// of a rising MACD or MACD-H pattern. Vice versa for negative divergence
MACDDivMinWidth = Param("Divergence min width", 4, 1, 10, 1 );  
// Minimum width of negative projecting wave between two positive MACD-H waves, 
// otherwise two positive waves will be considered as one single wave. This
// minimises invalid divergences, to ensure that "back of bears is broken".
// The same applies for a positive wave between two negative waves.
HistMinWidth = Param("Histogram min width", 4, 1, 10, 1 ); 
PeriodEMA = Optimize( "PeriodEMA ", 13, 5, 23, 1 );
// Other parameters
OpenPositions = 10;
ATRPeriod = 5;
InitialCapital = 100000;
PeriodFast = Param( "Fast EMA", 8, 2, 200, 1 );
PeriodSlow = Param( "Slow EMA", 17, 2, 200, 1 );
PeriodSignal = Param( "Signal EMA", 9, 2, 200, 1 );
MACDInd = MACD(PeriodFast, PeriodSlow );
SigInd = Signal(PeriodFast, PeriodSlow , PeriodSignal );
HistInd = MACDInd - SigInd ;
_N( macdStr = WriteVal( PeriodFast, 1.0 )+","+WriteVal( PeriodSlow , 1.0 ) );
_N( sigStr = macdStr + ","+WriteVal( PeriodSignal , 1.0 ) );

// Get displayed min and max value of MACD and MACD-H, to rescale it for better visibility
scMACDMax = LastValue(HHV(Max(MACDInd, sigInd), 
                  BarsSince( Status("barvisible") AND NOT Ref(Status("barvisible"),-1) ))); 
scMACDMin = LastValue(LLV(Min(MACDInd, sigInd), 
                  BarsSince( Status("barvisible") AND NOT Ref(Status("barvisible"),-1) ))); 
scaleMACD = Max( abs(scMACDMax), abs(scMACDMin) ); 
scHistMax = LastValue(HHV(HistInd, 
            BarsSince( Status("barvisible") AND NOT Ref(Status("barvisible"),-1) ))); 
scHistMin = LastValue(LLV(HistInd, 
            BarsSince( Status("barvisible") AND NOT Ref(Status("barvisible"),-1) ))); 
scaleHist = Max( abs(scHistMax), abs(scHistMin) ); 
_SECTION_END();


_SECTION_BEGIN("Candle Detail"); 
Candletype=ParamList("Candle Type","Candle|Haikin",1);
UpCandle = ParamColor("Up Color", colorBrightGreen );
DownCandle = ParamColor("Down Color", colorRed );
Consolidation = ParamColor("Consolidation", colorWhite );

MACDColorUp = ParamColor("MACD Up", colorDarkGreen );
MACDColorDown = ParamColor("MACD Down", colorDarkRed );
Prd1=Param("ATR Period",4,1,20,1);
Prd2=Param("Look Back",8,1,20,1);


if(Candletype=="Candle")
{
  CandleColor = IIf(MACD(9,34) < Signal(9,34,9), DownCandle, UpCandle);
  Plot( Close, "Price", CandleColor, styleCandle ); 
}
else if(Candletype=="Haikin")
{
HaClose = (O+H+L+C)/4; 
HaOpen = AMA( Ref( HaClose, -1 ), 0.3 ); 
HaHigh = Max( H, Max( HaClose, HaOpen ) ); 
HaLow = Min( L, Min( HaClose, HaOpen ) );
HaClose = (O+H+L+C)/4; 
HaOpen = AMA( Ref( HaClose, -1 ), 0.3 ); 
HaHigh = Max( H, Max( HaClose, HaOpen ) ); 
HaLow = Min( L, Min( HaClose, HaOpen ) );

BrightGreen=HHV(LLV(L,Prd1)+ATR(Prd1),Prd2); 
BrightRed=LLV(HHV(H,Prd1)-ATR(Prd1),Prd2); 

xDiff = (HaHigh - Halow) * IIf(StrFind(Name(),"JPY"),100,10000);
barcolor = IIf(C>BrightGreen ,UpCandle,IIf(C < BrightRed,DownCandle,Consolidation)); 

SetBarFillColor( IIf(MACDInd >SigInd, MACDColorUp,MACDColorDown) ); 
PlotOHLC( HaOpen, HaHigh, HaLow, HaClose, "", barcolor, styleCandle );
}

_SECTION_END();

_SECTION_BEGIN("Guppy"); 
Guppy=ParamToggle("Guyyp","No|Yes",0);
if(Guppy)
{
Plot( EMA( C, 30 ),"", ParamColor( "Color1", colorYellow ), ParamStyle("Chart Style", styleLine|styleNoLabel) ); 
Plot( EMA( C, 35 ),"", ParamColor( "Color", colorRed ), ParamStyle("Chart Style", styleLine|styleNoLabel) );
Plot( EMA( C, 40 ),"", ParamColor( "Color", colorRed ), ParamStyle("Chart Style", styleLine|styleNoLabel) );
Plot( EMA( C, 45 ),"", ParamColor( "Color", colorRed ), ParamStyle("Chart Style", styleLine|styleNoLabel) );
Plot( EMA( C, 50 ),"", ParamColor( "Color", colorRed ), ParamStyle("Chart Style", styleLine|styleNoLabel) );
Plot( EMA( C, 55 ),"", ParamColor( "Color", colorRed ), ParamStyle("Chart Style", styleLine|styleNoLabel) );
Plot( EMA( C, 60 ),"", ParamColor( "Color", colorRed ), ParamStyle("Chart Style", styleLine|styleNoLabel) );
}
_SECTION_END();

_SECTION_BEGIN("Support-Resistance");
SupRes=ParamToggle("Sup-Res","No|Yes",1);
SupResA = Param("Sup-Res A Period",20,0,100,1);
SupResB = Param("Sup-Res B Period",25,0,100,1);

Res1 = ParamColor("Resistance High", colorRed );
Res2 = ParamColor("Resistance Low", colorDarkRed );
Sup1 = ParamColor("Support High", colorDarkGreen );
Sup2 = ParamColor("Support Low", colorBrightGreen );
if(SupRes)
{
MaxGraph = 12;
BuyOffSet = SupResA;//Optimize("BuyOffSet",18,15,20,1);
SellOffset = BuyOffSet;//Optimize("SellOffset",2,2,14,2);
RegLength = 5;//Optimize("RegLength",5, 2,11,2);
BuyATRPeriod = 2;//Optimize("BuyATRPeriod",2,2,5,1);
SellATRPeriod = BuyATRPeriod;//Optimize("SellATRPeriod",4,2,11,2);
ATRMultiplier = 0.5;//Optimize("ATRMultiplier",1,0.7,1.25,.05);
SuppA = HHV(H-ATRMultiplier*ATR(BuyATRPeriod),BuyOffset); /* RED */
RessB = LLV(L+ATRMultiplier*ATR(SellATRPeriod),SellOffset); /* GREEN */
Plot(SuppA,"",sup1,ParamStyle("Sup-Res A Style", styleDashed|styleNoTitle) );
Plot(RessB,"",res2,ParamStyle("Sup-Res A Style", styleDashed|styleNoTitle) ); 

nn=SupResB;
mmm=100;
TYP=(High + Low + 2*Close)/4;
CI=(TYP-MA(TYP,14))/(0.015*StDev(TYP,14));
CCCI=EMA(CI,5)+mmm;
Hh=HHV(H,nn);
Ll=LLV(L,nn);
MM=(Hh+Ll)/2;
CCCC=EMA(CCCI*(Hh-Ll)/(2*mmm)+Ll,5);
Plot(Hh,"",Res1, ParamStyle("Sup-Res B Style", styleThick|styleNoTitle) );
Plot(Ll,"",Sup2, ParamStyle("Sup-Res B Style", styleThick|styleNoTitle) ) ;
}
_SECTION_END();

_SECTION_BEGIN("BB"); 
BBand=ParamToggle("B.Band","No|Yes",0);
if(BBand)
{
pr1=Param( "Period1",20,0,100,1);
pr2=Param( "Period2",2,0,100,1);
BBColor = ParamColor( "Band Color", colorGrey50 );
Cloud = ParamColor( "Cloud", colorDarkGrey );
Style = styleNoRescale | styleNoLabel |styleDashed;
 BBT=BBandTop(C,pr1,pr2);
 BBB=BBandBot(C,pr1,pr2);
topcond = (Cross(BBT,C)OR C>BBT)AND Ref(C, -1)> BBT;
botcond = ( Cross(C,BBB))AND Ref(C, -1 < BBB);
 Plot( BBT, "BBTop" + _PARAM_VALUES(), BBColor, ParamStyle("BBand Style", styleLine|styleNoLabel|styleNoTitle) );
 Plot( BBB, "BBBot" + _PARAM_VALUES(), BBColor, ParamStyle("BBand Style", styleLine|styleNoLabel|styleNoTitle) ); 
PlotOHLC( BBT,BBT,BBB,BBB, "", Cloud,styleCloud|styleNoLabel );
}
_SECTION_END();

_SECTION_BEGIN("Pivot");
nBars = Param("Number of bars", 12, 5, 40);
bShowTCZ = Param("Show TCZ", 1, 0, 1); 
nExploreBarIdx = 0;
nExploreDate = 0;
nCurDateNum = 0;
DN = DateNum();
DT = DateTime();
bTCZLong = False;
bTCZShort = False;
nAnchorPivIdx = 0;
ADX8 = ADX(8);
if(Status("action")==1) {
 bDraw = True;
 bUseLastVis = 1;
} else {
 bDraw = False;
 bUseLastVis = False;
 bTrace = 1;
 nExploreDate = Status("rangetodate");
 for (i=LastValue(BarIndex());i>=0;i--) {
  nCurDateNum = DN[i];
  if (nCurDateNum == nExploreDate) {
   nExploreBarIdx = i;
  }
 }
}
GraphXSpace=7;
if (bDraw) {
}
aHPivs = H - H;
aLPivs = L - L;
aHPivHighs = H - H;
aLPivLows = L - L;
aHPivIdxs = H - H;
aLPivIdxs = L - L;
aAddedHPivs = H - H;
aAddedLPivs = L - L;
aLegVol = H - H;
aRetrcVol = H - H;
nHPivs = 0;
nLPivs = 0;
lastHPIdx = 0;
lastLPIdx = 0;
lastHPH = 0;
lastLPL = 0;
curPivBarIdx = 0;
aHHVBars = HHVBars(H, nBars);
aLLVBars = LLVBars(L, nBars);
aHHV = HHV(H, nBars);
aLLV = LLV(L, nBars);
nLastVisBar = LastValue(
 Highest(IIf(Status("barvisible"), BarIndex(), 0)));
curBar = IIf(nlastVisBar > 0 AND bUseLastVis, nlastVisBar, 
 IIf(Status("action")==4 AND nExploreBarIdx > 0, nExploreBarIdx,
 LastValue(BarIndex())));
curTrend = "";
if (aLLVBars[curBar] < aHHVBars[curBar]) 
 curTrend = "D";
else 
 curTrend = "U";
if (curBar >= 120) {
 for (i=0; i<120; i++) { 
  curBar = IIf(nlastVisBar > 0 AND bUseLastVis, 
   nlastVisBar-i, 
   IIf(Status("action")==4 AND nExploreBarIdx > 0, 
   nExploreBarIdx-i,
   LastValue(BarIndex())-i));
  if (aLLVBars[curBar] < aHHVBars[curBar]) {
   if (curTrend == "U") {
    curTrend = "D";
    curPivBarIdx = curBar - aLLVBars[curBar];
    aLPivs[curPivBarIdx] = 1;
    aLPivLows[nLPivs] = L[curPivBarIdx];
    aLPivIdxs[nLPivs] = curPivBarIdx;
    nLPivs++;
   }
  } else {
   if (curTrend == "D") {
    curTrend = "U";
    curPivBarIdx = curBar - aHHVBars[curBar];
    aHPivs[curPivBarIdx] = 1;
    aHPivHighs[nHPivs] = H[curPivBarIdx];
    aHPivIdxs[nHPivs] = curPivBarIdx;
    nHPivs++;
   }
  }  
 } 
}
curBar = 
 IIf(nlastVisBar > 0 AND bUseLastVis, 
 nlastVisBar, 
 IIf(Status("action")==4 AND nExploreBarIdx > 0, 
 nExploreBarIdx,
 LastValue(BarIndex()))
 );
if (nHPivs >= 2 AND nLPivs >= 2) {
 lastLPIdx = aLPivIdxs[0];
 lastLPL = aLPivLows[0];
 lastHPIdx = aHPivIdxs[0];
 lastHPH = aHPivHighs[0];
 nLastHOrLPivIdx = Max(lastLPIdx, lastHPIdx);
 nAddPivsRng = curBar - nLastHOrLPivIdx;
 aLLVAfterLastPiv = LLV(L, nAddPivsRng);  
 nLLVAfterLastPiv = aLLVAfterLastPiv[curBar];
 aLLVIdxAfterLastPiv = LLVBars(L, nAddPivsRng);  
 nLLVIdxAfterLastPiv = curBar - aLLVIdxAfterLastPiv[curBar];
 aHHVAfterLastPiv = HHV(H, nAddPivsRng); 
 nHHVAfterLastPiv = aHHVAfterLastPiv[curBar];
 aHHVIdxAfterLastPiv = HHVBars(H, nAddPivsRng); 
 nHHVIdxAfterLastPiv = curBar - aHHVIdxAfterLastPiv[curBar];
 if (lastHPIdx > lastLPIdx) {
 
  /* There are at least two possibilities here. One is that
      the previous high was higher, indicating that this is a 
      possible short retracement or one in the making.
      The other is that the previous high was lower, indicating 
      that this is a possible long retracement in the working. 
   However, both depend on opposing pivots. E.g., if I find 
   higher highs, what if I have lower lows?  
  
   If the highs are descending, then I can consider:
       - a lower low, and leave it at that
       - a higher high and higher low
       - a lower low and another lower high
  */
  if (aHPivHighs[0] < aHPivHighs[1]) {
 
   if (nLLVAfterLastPiv < aLPivLows[0] AND 
    (nLLVIdxAfterLastPiv - lastHPIdx - 1) >= 1
    AND nLLVIdxAfterLastPiv != curBar ) {
 
    // -- OK, we'll add this as a pivot. 
    //    Mark it for plotting...
    aLPivs[nLLVIdxAfterLastPiv] = 1;
    aAddedLPivs[nLLVIdxAfterLastPiv] = 1;
  
    //    ...and then rearrange elements in the 
    //    pivot information arrays
    for (j=0; j<nLPivs; j++) {
     aLPivLows[nLPivs-j] = aLPivLows[nLPivs-(j+1)];
     aLPivIdxs[nLPivs-j] = aLPivIdxs[nLPivs-(j+1)];
    }
    aLPivLows[0] = nLLVAfterLastPiv;
    aLPivIdxs[0] = nLLVIdxAfterLastPiv;
    nLPivs++;
 
   // -- Test whether to add piv given last piv is high 
   //    AND we have lower highs 
   }
 
  // -- Here, the last piv is a high piv, and we have 
  //    higher-highs. The most likely addition is a 
  //    Low piv that is a retracement.
  } else {
 
   if (nLLVAfterLastPiv > aLPivLows[0] AND 
    (nLLVIdxAfterLastPiv - lastHPIdx - 1) >= 1
    AND nLLVIdxAfterLastPiv != curBar ) {
 
    // -- OK, we'll add this as a pivot. 
    //    Mark it for plotting...
    aLPivs[nLLVIdxAfterLastPiv] = 1;
    aAddedLPivs[nLLVIdxAfterLastPiv] = 1;
  
    //    ...and then rearrange elements in the 
    //    pivot information arrays
    for (j=0; j<nLPivs; j++) {
     aLPivLows[nLPivs-j] = aLPivLows[nLPivs-(j+1)];
     aLPivIdxs[nLPivs-j] = aLPivIdxs[nLPivs-(j+1)];
    }
    aLPivLows[0] = nLLVAfterLastPiv;
    aLPivIdxs[0] = nLLVIdxAfterLastPiv;
    nLPivs++;
 
   // -- Test whether to add piv given last piv is high 
   //    AND we have lower highs 
   } 
  // -- The last piv is a high and we have higher highs 
  //    OR lower highs
  }
 
 /* ****************************************************************
  Still finding missed pivot(s). Here, the last piv is a low piv.
 **************************************************************** */
 } else {
 
  // -- First case, lower highs
  if (aHPivHighs[0] < aHPivHighs[1]) {
 
   if (nHHVAfterLastPiv < aHPivHighs[0] AND 
    (nHHVIdxAfterLastPiv - lastLPIdx - 1) >= 1
    AND nHHVIdxAfterLastPiv != curBar ) {
 
    // -- OK, we'll add this as a pivot. 
    //    Mark that for plotting
    aHPivs[nHHVIdxAfterLastPiv] = 1;
    aAddedHPivs[nHHVIdxAfterLastPiv] = 1;
 
    //    ...and then rearrange elements in the 
    //    pivot information arrays
    for (j=0; j<nHPivs; j++) {
     aHPivHighs[nHPivs-j] = aHPivHighs[nHPivs-(j+1)];
     aHPivIdxs[nHPivs-j] = aHPivIdxs[nhPivs-(j+1)];
    }
    aHPivHighs[0] = nHHVAfterLastPiv;
    aHPivIdxs[0] = nHHVIdxAfterLastPiv;
    nHPivs++;
 
   // -- Test whether to add piv given last piv is high 
   //    AND we have lower highs 
   }
 
  // -- Second case when last piv is a low piv, higher highs 
  //    Most likely addition is high piv that is a retracement.
  //    Considering adding a high piv as long as it is higher
  } else {
 
   // -- Where I have higher highs,
   if (nHHVAfterLastPiv > aHPivHighs[0] AND 
    (nHHVIdxAfterLastPiv - lastLPIdx - 1) >= 1
    AND nHHVIdxAfterLastPiv != curBar ) {
 
    // -- OK, we'll add this as a pivot. 
    //    Mark it for plotting...
    aHPivs[nHHVIdxAfterLastPiv] = 1;
    aAddedHPivs[nHHVIdxAfterLastPiv] = 1;
 
    //    ...and then rearrange elements in the 
    //    pivot information arrays
    for (j=0; j<nHPivs; j++) {
     aHPivHighs[nHPivs-j] = aHPivHighs[nHPivs-(j+1)];
     aHPivIdxs[nHPivs-j] = aHPivIdxs[nhPivs-(j+1)];
    }
    aHPivHighs[0] = nHHVAfterLastPiv;
    aHPivIdxs[0] = nHHVIdxAfterLastPiv;
    nHPivs++;
 
   // -- Test whether to add piv given last piv is high 
   //    AND we have lower highs 
   }
 
  }
   
 } 

// -- If there are at least two of each
}

/* ****************************************
// -- Done with finding pivots
***************************************** */ 

if (bDraw) {
PivotEntry = ParamColor( "Entry Color", colorBrightGreen );
PivotEntry2 = ParamColor( "Entry Color2", colorYellow );
PivotExit = ParamColor( "Exit Color", colorRed );
PivotExit2 = ParamColor( "Exit Color2", colorYellow );
 // -- OK, let's plot the pivots using arrows
 PlotShapes(
  IIf(aHPivs==1, shapeSquare, shapeNone), 
   PivotExit, 0,  High, Offset=30);
 PlotShapes(
  IIf(aAddedHPivs==1, shapeSquare, shapeNone),
   PivotExit2, 0, High, Offset=30);
 PlotShapes(
  IIf(aLPivs==1, shapeSquare , shapeNone),  
   PivotEntry, 0, Low, Offset=-30);
 PlotShapes(
  IIf(aAddedLPivs==1, shapeSquare , shapeNone), 
   PivotEntry2, 0, Low, Offset=-30);

 PlotShapes(
  IIf(aHPivs==1, shapeSquare, shapeNone), 
   colorBlack, 0,  High, Offset=35);
 PlotShapes(
  IIf(aAddedHPivs==1, shapeSquare, shapeNone),
   colorBlack, 0, High, Offset=35);
 PlotShapes(
  IIf(aLPivs==1, shapeSquare , shapeNone),  
   colorBlack, 0, Low, Offset=-35);
 PlotShapes(
  IIf(aAddedLPivs==1, shapeSquare , shapeNone), 
   colorBlack, 0, Low, Offset=-35);
}

/* ****************************************
// -- Done with discovering and plotting pivots 
***************************************** */ 

// -- I'm going to want to look for possible retracement
risk = 0;
profInc = 0;
nLeg0Pts = 0;
nLeg0Bars = 0;
nLeg0Vol = 0;
nLeg1Pts = 0;
nLeg1Bars = 0;
nLeg1Vol = 0;
nLegBarsDiff = 0;
nRtrc0Pts = 0;
nRtrc0Bars = 0;
nRtrc0Vol = 0;
nRtrc1Pts = 0;
nRtrc1Bars = 0;
nRtrc1Vol = 0;

minRtrc = 0;
maxRtrc = 0;
minLine = 0;
maxLine = 0;
triggerLine = 0;
firstProfitLine = 0;
triggerInc = 0;
triggerPrc = 0;
firstProfitPrc = 0;
retrcPrc = 0;
retrcBar = 0;
retrcBarIdx = 0;
retrcRng = 0;
aRetrcPrc = H-H;
aRetrcPrcBars = H-H;
aRetrcClose = C;
retrcClose = 0;

// -- Do TCZ calcs. Arrangement of pivs very specific
//    for this setup.
if (nHPivs >= 2 AND 
 nLPivs >=2 AND  
 aHPivHighs[0] > aHPivHighs[1] AND
 aLPivLows[0] > aLPivLows[1]) {

 tcz500 = 
 (aHPivHighs[0] -
 (.5 * (aHPivHighs[0] - aLPivLows[1])));

 tcz618 = 
 (aHPivHighs[0] -
 (.618 * (aHPivHighs[0] - aLPivLows[1])));

 tcz786 = 
 (aHPivHighs[0] -
 (.786 * (aHPivHighs[0] - aLPivLows[0])));

 retrcRng = curBar  - aHPivIdxs[0];
 aRetrcPrc = LLV(L, retrcRng);
 aRetrcPrcBars  = LLVBars(L, retrcRng);
 
 retrcPrc = aRetrcPrc[curBar];
 retrcBarIdx = curBar - aRetrcPrcBars[curBar];
 retrcClose = aRetrcClose[retrcBarIdx];

 // -- bTCZLong setup?
 bTCZLong = (

  // -- Are retracement levels arranged in
  //    tcz order?

  // .500 is above .786 for long setups
  tcz500 >= (tcz786 * (1 - .005))
  AND 
  // .681 is below .786 for long setups
  tcz618 <= (tcz786 * (1 + .005))
  AND

  // -- Is the low in the tcz range
  // -- Is the close >= low of tcz range
  //    and low <= high of tcz range
  retrcClose >= ((1 - .01) *  tcz618)
  AND
  retrcPrc <= ((1 + .01) *  tcz500)
  ); 
  
  // -- risk would be high of signal bar minus low of zone
  //risk = 0;

// -- lower highs and lower lows
} else if (nHPivs >= 2 AND nLPivs >=2 
 AND aHPivHighs[0] < aHPivHighs[1] 
 AND aLPivLows[0] < aLPivLows[1]) {

 tcz500 = 
 (aHPivHighs[1] -
 (.5 * (aHPivHighs[1] - aLPivLows[0])));

 tcz618 = 
 (aHPivHighs[0] -
 (.618 * (aHPivHighs[1] - aLPivLows[0])));

 tcz786 = 
 (aHPivHighs[0] -
 (.786 * (aHPivHighs[0] - aLPivLows[0])));

 retrcRng = curBar  - aLPivIdxs[0];
 aRetrcPrc = HHV(H, retrcRng);
 retrcPrc = aRetrcPrc[curBar];
 aRetrcPrcBars  = HHVBars(H, retrcRng);
 retrcBarIdx = curBar - aRetrcPrcBars[curBar];
 retrcClose = aRetrcClose[retrcBarIdx];

 bTCZShort = (
  // -- Are retracement levels arranged in
  //    tcz order?

  // .500 is below .786 for short setups
  tcz500 <= (tcz786 * (1 + .005))
  AND 
  // .681 is above .786 for short setups
  tcz618 >= (tcz786 * (1 - .005)) 
  AND

  // -- Is the close <= high of tcz range
  //    and high >= low of tcz range
  retrcClose <= ((1 + .01) *  tcz618)
  AND
  retrcPrc >= ((1 - .01) *  tcz500)
  ); 
  
  // -- Risk would be top of zone - low of signal bar 
  //risk = 0;
}

// -- Show zone if present
if (bTCZShort OR bTCZLong) { 

 // -- Be prepared to see symmetry
 if (bTCZShort) {
  if (aLPivIdxs[0] > aHPivIdxs[0]) { 
   // -- Valuable, useful symmetry information 
   nRtrc0Pts = aHPivHighs[0] - aLPivLows[1];
   nRtrc0Bars = aHPivIdxs[0] - aLPivIdxs[1] + 1;
   nRtrc1Pts = retrcPrc - aLPivLows[0];
   nRtrc1Bars = retrcBarIdx - aLPivIdxs[0] + 1;
  } else {
   nRtrc0Pts = aHPivHighs[1] - aLPivLows[1];
   nRtrc0Bars = aHPivIdxs[1] - aLPivIdxs[1] + 1;
   nRtrc1Pts = aHPivHighs[0] - aLPivLows[0];
   nRtrc1Bars = aHPivIdxs[0] - aLPivIdxs[0] + 1;
  }
 } else { // bLongSetup
  if (aLPivIdxs[0] > aHPivIdxs[0]) { 
   nRtrc0Pts = aHPivHighs[0] - aLPivLows[1];
   nRtrc0Bars = aHPivIdxs[0] - aLPivIdxs[1] + 1;
   nRtrc1Pts = retrcPrc - aLPivLows[0];
   nRtrc1Bars = retrcBarIdx - aLPivIdxs[0] + 1;
  } else {
   nRtrc0Pts = aHPivHighs[1] - aLPivLows[0];
   nRtrc0Bars = aLPivIdxs[0] - aHPivIdxs[1] + 1;
   nRtrc1Pts = aHPivHighs[0] - aLPivLows[0];
   nRtrc1Bars = aLPivIdxs[0] - aHPivIdxs[0] + 1;
  }
 }

 if (bShowTCZ) {
  Plot(
   LineArray( IIf(bTCZLong, aHPivIdxs[0], aLPivIdxs[0]),
   tcz500, curBar, tcz500 , 0), 
   "tcz500", colorPaleBlue, styleLine|styleNoTitle|Stylehidden);
  Plot(
   LineArray( IIf(bTCZLong, aHPivIdxs[0], aLPivIdxs[0]),
   tcz618, curBar, tcz618, 0), 
   "tcz618", colorPaleBlue, styleLine|styleNoTitle|styleHidden);
  Plot(
   LineArray( IIf(bTCZLong, aHPivIdxs[0], aLPivIdxs[0]),
   tcz786, curBar, tcz786, 0), 
   "tcz786", colorTurquoise, styleLine|styleNoTitle|StyleHidden);
 }
 
// -- if (bShowTCZ)
}
  
if (bDraw) {
 Title = Name() + " (" + StrLeft(FullName(), 10) + 
 ")  ATR: " + NumToStr(ATR(1), 4.2) + " ( " + 
 NumToStr((C - Ref(C, -1)), 4.2) + " / " +
 NumToStr((((C - Ref(C, -1)) / Ref(C, -1)) * 100), 2.1) +  "% )  " +
 WriteVal( SelectedValue( DateTime() ), formatDateTime) +
 
// "Risk: " + WriteVal(risk, 2.1) + "%  \n" +

 WriteVal(nRtrc1Pts, 2.1) + "  \n" +

 WriteVal(nRtrc1Bars, 2.0);
}

// **************************
// END INDICATOR CODE
// **************************
_SECTION_END();

_SECTION_BEGIN("Fundamental data");
FaceValue=GetFnData("BookValuePerShare");
facevalue=GetFnData("sharesshort");
EPS=GetFnData("EPS");
PE=(Close/EPS);
TotalShares=GetFnData("SharesOut");
public=GetFnData("sharesfloat");
Director=GetFnData("INSIDERHOLDPERCENT");
Lot=GetFnData("SharesShortPrevMonth" );
LotPrice=(Lot*Close);
institute=GetFnData("InstitutionHoldPercent" );
Hyeps=GetFnData("EPSEstCurrentYear" );
PEPS = Hyeps*2;
PPER = C/PEPS;
PublicShare = (public*TotalShares)/100;
PHTP = (V/PublicShare)*100;
THTP = (V/TotalShares)*100; 

OverValued = Param("Over Valued",20,0,50,1);
Reborn=ParamToggle("Reborn","No|Yes",1); 
if(Reborn)
{
Linecolor = IIf(PE>OverValued, colorRed,colorBrightGreen);
//Plot(5, "",Linecolor, styleOwnScale|styleArea|styleNoLabel,-0.5, 600 ); 
}
_SECTION_END();

_SECTION_BEGIN("Title"); 
Title = StrFormat("\\c02'TOXIC PATTERN'.....{{NAME}}.....{{DATE}}.....Open @ %g.....High @ %g.....Low @ %g.....Close @ %g.....Change = %.1f%%  
Volume = " +WriteVal( V, 1.0 ) +", {{VALUES}}", O, H, L, C, SelectedValue( ROC( C, 1 )) )
//+"\n"
//+"\n"
//+"\n" + EncodeColor(colorWhite)  + "........Fundamental........"
//+"\n" + EncodeColor(colorYellow)  + "C. EPS @ " + EPS
//+"\n" + "C. PER @ " + PE
//+"\n" + "P. EPS @ " + PEPS
//+"\n" + "P. PER @ " + PPER
//+"\n"
//+"\n" + "Face value @ " + facevalue
//+"\n" + "Market lot   @ " + Lot
//+"\n" + "Lot Price    @ " + LotPrice
//+"\n"
//+"\n" + "Dir Holding   @ "+Director+"%"
//+"\n" + "Pub Holding @ "+public+"%"
//+"\n" + "Ins Holding   @ "+institute+"%"
//+"\n"
//+"\n" + "Total Share   (L) @ " + TotalShares/100000
//+"\n" + "Public Share (L) @ " + PublicShare/100000
//+"\n"
//+"\n" + "THTP @ " + THTP
//+"\n" + "PHTP @ " + PHTP 
;
_SECTION_END();


_SECTION_BEGIN("Explore");
LastBar = Cum( 1 ) == LastValue( Cum( 1 ) );  

Filter = LastBar; 
AddColumn (Volume , "Volume" );
AddColumn (EPS , "C.EPS" );
AddColumn (PE , "C.PER" );
AddColumn (PEPS , "P.EPS" );
AddColumn (PPER , "P.PER" );
AddColumn (THTP , "THTP" );
AddColumn (PHTP , "PHTP" );
_SECTION_END();



_SECTION_BEGIN("Fibo for all bars");

TimeFrameSet( in15Minute*2 ); 
DH=Ref(H,-1); 
DL=Ref(L,-1);
DC=Ref(C,-1);


pd = (O+ DH+ DL + DC )/4;
sd1 = (2*pd)-DH;
sd2 = pd -(DH - DL);
sd3 = Sd1 - (DH-DL); 
rd1 = (2*pd)-DL;
rd2 = pd +(DH -DL);
rd3 = rd1 +(DH-DL);



//Plot (pd,"Pivot",colorBlue,styleDots);
//Plot (rd1," R1 ",35,styleDots);
//Plot (rd2," R2 ",35,styleDots);
//Plot (rd3," R3 ",35,styleDots);

//Plot (sd1," S1 ",4,styleDots);
//Plot (Sd2," S2 ",4,styleDots);
//Plot (Sd3," S3 ",4,8+16);
/*
style = IIf(ParamList("Chart style", "styleCandle|styleBar")=="styleCandle",64,128+4);
Plot (C,Date ()+" close",1,style); //ENABLE THIS TO HAVE CANDLES AS WELL
*/
TimeFrameRestore();


Title = EncodeColor(colorWhite)+ "Highly Accurate Support Resistance" + " - " +  Name() + " - " + EncodeColor(colorRed)+ Interval(2) + EncodeColor(colorWhite) +
 "  - " + Date() +" - "
//+ WriteIf(Col_action==colorGreen, EncodeColor(colorGreen)+"stay LONG","")+ WriteIf(Col_action==colorRed, EncodeColor(colorRed)+"stay SHORT","")+  WriteIf(Col_action==colorBlack, EncodeColor(colorYellow)+"No Trend","")+"\n"
+ "Vol= "+ WriteVal(V) +WriteIf ( V > MA(V,26) ,EncodeColor(colorGreen)+"  UP "+ (V/MA(V,26))*100 + " %", EncodeColor(colorRed)+"  DOWN "+ (V/MA(V,26))*100 + " %")
+ EncodeColor(colorGreen)+   "\n R3 : "+ EncodeColor(colorWhite)+RD3
+ EncodeColor(colorGreen)+   "\n R2 : "+ EncodeColor(colorWhite)+RD2
+ EncodeColor(colorGreen)+   "\n R1 : "+ EncodeColor(colorWhite)+RD1+ EncodeColor(colorGreen)+   "`            Hi: "+ EncodeColor(colorWhite)+H
+ EncodeColor(colorBlue)+   "\n Pivot : "+ EncodeColor(colorWhite)+pd + EncodeColor(colorYellow)+   "`   Op: "+ EncodeColor(colorWhite)+O+ EncodeColor(colorAqua)+   "Cl: "+ EncodeColor(colorBrightGreen)+C
+ EncodeColor(colorRed)+   "\n S1 : "+ EncodeColor(colorWhite)+SD1+ EncodeColor(colorRed)+   "`            Lo: "+ EncodeColor(colorWhite)+L
+ EncodeColor(colorRed)+   "\n S2 : "+ EncodeColor(colorWhite)+SD2
+ EncodeColor(colorRed)+   "\n S3 : "+ EncodeColor(colorWhite)+SD3
;

_SECTION_END();
Previous Post Next Post